List of Articles by MeSH
DENTURE, PARTIAL
- Lončar A, Vojvodić D, Matejiček F, Jerolimov V. Flexural Strength of Denture Base Materials. Acta Stomatol Croat. 2006;40(2):151-61.
[details]
[close]
Full Text
| Title in English: |
Flexural Strength of Denture Base Materials |
| Title in Croatian: |
Savojna čvrstoća materijala za izradbu proteznih baza |
| Type of Article: |
original scientific paper |
| MeSH: |
POLYMERS DENTAL MATERIALS DENTURE, PARTIAL |
| Abstract: |
Fractures of polymer material are one of the most frequent reasons for repair of removable dentures. Therefore, there is a continuous strive to strengthen them, and polymer materials of high resistance to fracture are being developed. The aim of this study was to determine the fl exural strength of Ivocap “Plus” High Impact (Ivoclar Vivadent, Schaan, Liechtenstein) material using the method of “short bar” together with the injectional method of polymerization, as well as comparison of fl exural strength of Meliodent Heat Cure material with the use of classic pressure-heat polymerization, immediately after polymerization and after artificial ageing by storage at 37şC during 28 days and thermocycling. The study showed significantly higher values of fl exural strength (130.1-150.65 MPa) of Ivocap “Plus” compared to Meliodent (109.2-110.3 MPa) in groups of samples tested after polymerization and storage in water. In the group of samples tested after thermocycling there was no significant difference (148.75 compared to 156.25 MPa). Furthermore, there was no significant difference between the samples of same material although the procedure of artifi cial ageing was performed. |
- Knezović-Zlatarić D, Nemet M, Baučić I. Laboratory Fabrication Procedures of a Metal Partial Denture Framework. Acta Stomatol Croat. 2003;37(1):85-98.
[details]
[close]
Full Text
| Title in English: |
Laboratory Fabrication Procedures of a Metal Partial Denture Framework |
| Title in Croatian: |
Laboratorijski postupci izradbe jednokomadnoga metalnog odljeva djelomične proteze |
| Type of Article: |
review |
| MeSH: |
DENTAL CASTING TECHNIQUE CHROMIUM ALLOYS DENTURE, PARTIAL |
| Abstract: |
Metal partial denture framework is a constituent part of each metal partial denture. Its fabrication requires precision of both the technician and the dentist - from the initial phase of planning this prosthetic restoration, during impression taking, making of stone casts, cast duplication, modelling by means of wax patterns, flasking of duplicate casts, heating, glowing and casting of the metal construction, elimination of sprues and sandblasting, until final polishing of the casting and its adjustment on a stone cast and in the patient’s mouth.Sophisticated equipment plays an important part in technological fabrication procedures: robust and strong technical motor, parallelometer, thermostatic bowl for the duplication material, sandblasting device, device for mechanical polishing and electropolishing, glowing furnace, and finally, a special casting device based on induced electric current. |
- Dostalova T, Racek J, Lonekova E, Kreichova M. Veneers, Crowns, and Inlay Bridges After Orthodontic Therapy: a Three Year Prospective Study. Acta Stomatol Croat. 2002;36(3):352.
[details]
[close]
Full Text
| Title in English: |
Veneers, Crowns, and Inlay Bridges After Orthodontic Therapy: a Three Year Prospective Study |
| Title in Croatian: |
nema |
| Type of Article: |
congress abstract |
| MeSH: |
DENTAL VENEERS CROWNS DENTURE, PARTIAL ORTHODONTICS |
| Abstract: |
Composite veneers, crowns, and inlay bridges after orthodontic therapy can reshape the dental arch. The main emphasis is given on esthetic appearance of the patient and protection of healthy teeth. The aim of the study was to evaluate the long-term treatment stability.49 composite veneers, crowns and inlay bridges (20 patients) were inserted on the frontal teeth as a part of reshaping and reorientation of teeth after orthodontic therapy; diasthemic closure, microdontia of lateral incisors, reshaping of canines, anodontia of lateral incisors, etc. Based on ADA recommendation a special card was prepared containing relevant information on the patients. Used materials were: Charisma, Artglass, (Kulzer) Ribbond, (Sigma Dental Systems) Targis, Vectris, (Ivoclar). Baseline examination was made one week and three years after therapy. Clinical assessments were carried out in accordance with the US Public Health Service System. The follow-up included: marginal ridge, marginal adaptation, anatomic form, caries presence, color match, cavo surface margin discoloration, surface smoothness and postoperative sensitivity.In the three year period, marginal ridge contour and adaptation were excellent (100% alfa). Anatomic form was destroyed in 18.7%. The general contour of the restoration followed the overall contour of the teeth in 81.3%. In our study no evidence of caries was found. The color match was darker and translucent in 31.2 %, and marginal discoloration was seen in 12.5%. The entire surface of each restoration was smooth with marked spot relief in 62.5%.The results demonstrate that composite resin and reinforced polymers are an effective method for long-term stable treatment. |
- Cikač E. A Clinical Report of the Shaping of a Lateral Metal-Free Bridge Made of Vita In-Ceram Zirconia. Acta Stomatol Croat. 2002;36(3):343.
[details]
[close]
Full Text
| Title in English: |
A Clinical Report of the Shaping of a Lateral Metal-Free Bridge Made of Vita In-Ceram Zirconia |
| Title in Croatian: |
nema |
| Type of Article: |
congress abstract |
| MeSH: |
DENTURE, PARTIAL |
| Abstract: |
Because of some aesthetic imperfections and because metal is unsuitable for some patients, metal-free ceramic has been developed. A patient, 50 years old, is presented with a 6 year old faceted bridge on teeth 24, 25, 26, 27. The patient complained of thermal irritation in the cervical region. A clinical examination showed gingivitis and lack of hygiene. Between the toothsegment 26 and thecrown on 27 was a fracture, and the patient decided to have a new bridge made. A metal-free ceramic bridge made of Vita In-ceram zirconium was suggested as well as treatment of the periodontium by the Durr Vektor method. The teeth region 24 and 27 were anesthetized with local infiltration anesthetic. Silicone impression fora temporary bridge was taken. Using the separatory bur in the red contra angle Titan TE 200 crowns 24 and 27 were separated and pulled with special dental forceps. Before beginning the preparation it is necessary to put the retraction thread in two levels circularly round the stump in the gingival sulcus to prevent bleeding. The 2 mm ofthe tooth crown depth is marked by a diamond bur. Labial and palatal it is done with a special grooved diamond point LVS-1 with 1.2 mm grooves. The tooth is treated in the following order - occlusally, labially, approximately and palatally. At the same time a 0.5 mm rectangular step inside the sulcus is prepared. Finally the rims of thestep and the stump are treated with Titan Eva-head TK 14 with 0,4 working amplitude and a maximum of 6000 r.p.m. The final treatment with Arkansas stone follows. The thread is removed and the impression in the additional silicone or polyether is taken. The relation between the jaws is estimated with the silicone key. The acrylic temporary bridge is made directly in the mouth and is cemented with temporary cement. The ceramic-free constructionis cemented by adhesional technique. |
- Suarez MJ, Lozano JF, Salido MP, Pradies G, Martinez F. Three-Year Clinical Evaluation of in Ceram Zirconia Bridges. Acta Stomatol Croat. 2002;36(3):325-6.
[details]
[close]
Full Text
| Title in English: |
Three-Year Clinical Evaluation of in Ceram Zirconia Bridges |
| Title in Croatian: |
nema |
| Type of Article: |
congress abstract |
| MeSH: |
DENTAL MATERIALS DENTURE, PARTIAL |
| Abstract: |
INTRODUCTION: The demand for esthetic restorations has led to the development of materials that are metal free. These materials must have adequate strength to be an alternative for the fabrication of fixed partial dentures in posterior segments of the dental arches.PURPOSE: The aim of the present study was to investigate in a long-term perspective whether the strength of the In Ceram Zirconia material is sufficient for use in posterior bridges.MATERIAL AND METHODS: Sixteen patients, who were between 23 and 50 years of age, with indications for a fixed denture replacing premolar or molar, were examined for participation in the study. Eighteen bridges were constructed with one or two pontics and two abutments, one on each side of the pontic. The patients were informed about risks of, and alternatives to, the proposed therapy.The supporting teeth were prepared with chamfer finish line and lack ofsharp line angles. Impressions were made with a rigid standard tray with an A-silicone putty soft and light-body materials (Aquasil, Dentsply). The laboratory procedures were performed by a laboratory autho rised by the Vita supplier. Ten of the bridges werecemented permanently with zinc phosphate cement and eight with glass ionomer cement. Clinical evaluation of the bridges were performed according to the California Dental Association’s quality evaluation system.RESULT: After three year evaluation all eighteen bridges were without signs of or any change in colour, and marginal integrity.CONCLUSION: In Ceram Zirconia is a potential alternative for full ceramic bridges in the posterior segments. |
- Knezović-Zlatarić D, Čelebić A, Valentić-Peruzović M, Pandurić J, Ćelić R, Poljak-Guberina R. The Influence of Kennedys Classification, Partial Denture Material and Construction on Patients Satisfaction. Acta Stomatol Croat. 2001;35(1):69-81.
[details]
[close]
Full Text
| Title in English: |
The Influence of Kennedys Classification, Partial Denture Material and Construction on Patients Satisfaction |
| Title in Croatian: |
Utjecaj klasifikacije djelomične bezubosti po Kennedyju, materijala i konstrukcije na zadovoljstvo pacijenata djelomičnim protezama |
| Type of Article: |
original scientific paper |
| MeSH: |
DENTURE, PARTIAL DENTURE DESIGN PATIENT SATISFACTION DENTAL MATERIALS |
| Abstract: |
The aim of the study was to evaluate patients’ general satisfaction with their removable partial dentures of different classification, construction, material, denture base shape (major connectors), denture support and the number of missing teeth. The aim was also to evaluate patients’ satisfaction with denture retention, speech, aesthetics, chewing ability and the comfort of wearing dentures, depending on the construction. A total of 165 patients with partial dentures took part in this study. There were 59 males and 106 females aged from 38 to 87 years. Patients graded satisfaction with their partial dentures in total and also with aesthetics, speech and retention, chewing ability and the comfort of wearing dentures by means of a scale from 1 to 5. The dentist determined Kennedy classification and their modifications, material and denture support, denture base shape and the number of missing teeth. The dentist also evaluated the denture construction. On the basis of the statistical analysis the following conclusions were made: 1. Patients were on the whole satisfied with their partial dentures (distribution of the scores of the patients’ assessments was asymmetrical towards the highest scores in all examined categories). 2. Kennedy classification and their modifications, material, denture base shape and denture support do not have an influence on patients’ satisfaction with denture retention, speech, mastication, aesthetics and comfort of wearing dentures (p>0.05). 3. The number of lower missing teeth influence the comfort of wearing lower dentures (p<0.05). 4. Construction of lower dentures have an influence on patients’ satisfaction with speech with lower partial denture (p<0.05). |
- Knezović-Zlatarić D, Čelebić A, Valentić-Peruzović M, Jerolimov V, Ćelić R, Filipović-Zore I, Alajbeg I [Iva]. Patients Satisfaction with Partial Denture Therapy. Acta Stomatol Croat. 2000;34(4):365-72.
[details]
[close]
Full Text
| Title in English: |
Patients Satisfaction with Partial Denture Therapy |
| Title in Croatian: |
Pacijentova procjena uspješnosti protetske terapije djelomičnim protezama |
| Type of Article: |
original scientific paper |
| MeSH: |
DENTURE, PARTIAL PATIENT SATISFACTION SOCIOECONOMIC FACTORS |
| Abstract: |
The aim of this study was to evaluate patients' satisfaction with their partial dentures in relation to some socio-economic variables. The aim was also to evaluate patients' satisfaction with denture retention, speech, aesthetics, chewing ability and comfort while wearing dentures. The influence of some factors, such as age, sex, marital status, level of education, smoking, chronic diseases, socio-economic status, ordinal number and age of thepresent dentures, on patients' satisfaction with partial dentures was also evaluated. A total of 165 patients with partial dentures took part in the study. There were 59 males and 106 females aged between 38 and 87 years. Patients graded their satisfaction with their partial dentures in total and then graded aesthetics, speech and retention, chewing ability and comfort while wearing dentures by using a scale from 1 to 5. Following a statistical analysis the following conclusions were made: 1. Patients were mostly satisfied with their partial dentures (the distribution of the scores of the patients' assessments was asymmetrical towards the highest scores in all examined categories). Only 3.2% of the patients were not absolutely satisfied with their partial dentures, 2. More then half of the examined patients scored all the examined variables in the best score category (5), 3. Patients of a higher level of education had higher criteria for the aesthetic appearance, as they assessed their partial denture aesthetics with a lower grades than patients with lower level of education. Males were less satisfied with the chewing ability of lower partial dentures (p<0.05) than females, 4. There was no significant difference in patients' assessments of the quality of their partial dentures between different age groups, ability of self-supporting life, socio-economic and economic status, marital status, smoking, presence of chronic diseases, number of previous dentures and age of present dentures (p>0.05). |
- Koval-Batkovski D, Batkovski S. Special features of adhesive bridge bonding systems. Acta Stomatol Croat. 1998;32(Suppl):153-4.
[details]
[close]
- Batkovski S, Koval-Batkovski D. Evoluton of resin bonded bridges. Acta Stomatol Croat. 1998;32(Suppl):152.
[details]
[close]
| Title in English: |
Evoluton of resin bonded bridges |
| Title in Croatian: |
nema |
| Type of Article: |
congress abstract |
| MeSH: |
DENTURE, PARTIAL COMPOSITE RESINS |
| Abstract: |
(not available) |
- Körber K. Clinical and technical results of fibre reinforced crown and bridgework. Acta Stomatol Croat. 1998;32(Suppl):146.
[details]
[close]
- Carek V, Jerolimov V, Novaković B. Changes in the values of retention forces in CEKA attachments. Acta Stomatol Croat. 1997;31(2):143-8.
[details]
[close]
- Miličević M, Ćatović A, Kovačiček F. [Influence of different surface preparations of Ag-Pd Maryland bridge constructions on dynamic strength of the composite-metal interface]. Acta Stomatol Croat. 1995;29(1):47-53.
[details]
[close]
| Title in English: |
Influence of different surface preparations of Ag-Pd Maryland bridge constructions on dynamic strength of the composite-metal interface |
| Title in Croatian: |
Utjecaj različitih priprema površine Ag-Pd konstrukcija Maryland mostova na dinamičku čvrstoću spoja metal-kompozit |
| Type of Article: |
original scientific paper |
| MeSH: |
DENTURE, PARTIAL DENTAL ALLOYS COMPOSITE RESINS TENSILE STRENGHT MATERIALS TESTING |
| Abstract: |
(not available) |
- Batkovski S. [Historical review of esthetic material attachment to metal support of crowns and bridges]. Acta Stomatol Croat. 1989;23(4):311-7.
[details]
[close]
| Title in English: |
Historical review of esthetic material attachment to metal support of crowns and bridges |
| Title in Croatian: |
Istorijski prikaz spajanja plastičnog materijala sa metalnom legurom |
| Type of Article: |
review |
| MeSH: |
DENTURE, PARTIAL CROWNS DENTAL MATERIALS |
| Abstract: |
Despite advantages and technological advances in the techniques of dental casts and ceramics attachment to metal, plastic materials for crown and bridge facetting are still of utmost importance for prosthetic procedures. In contrast to a hundred-year period of investigations of the ceramics-metal junction, the plastics-metal junction has been studied for not more than about 50 years. As the importance of this junction is being ever increasingly recognized, it may be expected to be optimized in the near future. |
- Nastić MM. [Changes of the retentional forces ceka intraoral anchors caused by the repeated removals]. Acta Stomatol Croat. 1989;23(2):127-36.
[details]
[close]
| Title in English: |
Changes of the retentional forces ceka intraoral anchors caused by the repeated removals |
| Title in Croatian: |
Promene retencione sile ceka intrakoronarnih sidara izazvane višestrukim razdvajanjem patrice i metrice |
| Type of Article: |
original scientific paper |
| MeSH: |
DENTURE, PARTIAL DENTAL ABUTMENTS DENTAL PROSTHESIS RETENTION |
| Abstract: |
A retainer should provide force capable of securing the position of the partial denture an still not damaging the periodontium of the abutment teeth. It's almost generally accepted that the retentional force should not be greater than 10N nor weaker than 5N. This study was designed to measure the forces required to disconnect parts of CEKA intracoronal anchors initially and repeatedly up to 50000 cycles. The results are compared with suggested values. It was found that the initial force exceeded 10N. After repeated removals retentional force decreased, but never under values of 5N. |
- Tihaček L, Stamenković D. [Anatomical and histological characteristics of proximal surfaces of abutment teeth]. Acta Stomatol Croat. 1989;23(2):121-6.
[details]
[close]
| Title in English: |
Anatomical and histological characteristics of proximal surfaces of abutment teeth |
| Title in Croatian: |
Anatomske i histološke karakteristike aproksimalnih površina retencionih zuba |
| Type of Article: |
original scientific paper |
| MeSH: |
DENTURE, PARTIAL DENTAL ABUTMENTS DENTAL PROSTHESIS RETENTION |
| Abstract: |
When the guide planes are formed on the proximal surfaces of abutment teeth the part of enamel is removed. Thickness of enamel and inclination of tooth are the factors that limit the possible tooth reduction. In this report anatomical and histological characteristics of proximal surfaces of the abutment teeth are analysed. Thickness of the enamel has been measured using the optical microscope for 280 prepared teeth. Measurements were performed on four zones of tooth's proximal surfaces, on the different distances from the top of enamel edge. Undercut of 420 proximal surfaces of tooth have been determined by micro-analyser with accuracy of 0.05 mm. By comparing the mean values of enamel thickness, in occlusal thirds, and undercut of proximal surfaces, it is possible to conclude that the formed guide plane remains in the enamel even after the removing of all natural undercuts. |
- Moser F. [Registration and position transfer of the mandible in partial prosthetics]. Acta Stomatol Croat. 1987;21(4):337-41.
[details]
[close]
| Title in English: |
Registration and position transfer of the mandible in partial prosthetics |
| Title in Croatian: |
Registracija i prijenos položaja mandibule u djelomičnoj protetici |
| Type of Article: |
professional paper |
| MeSH: |
MANDIBLE + physiology DENTURE, PARTIAL |
| Abstract: |
(not available) |
- Neceva L, Mirčeva M, Carcev M, Iljoska S, Bajraktarova B, Siljanovski V. [Oral rehabilitation in childhood]. Acta Stomatol Croat. 1981;15(1-2):45-8.
[details]
[close]
- Milanović S. [Behaviour of dental bridge cross sections in relation to load forces]. Acta Stomatol Croat. 1981;15(1-2):27-31.
[details]
[close]
- Catović A, Kosvel Z, Muftić O. [Comparison of the deformation of parallel and nonparallel abutments for dental bridges]. Acta Stomatol Croat. 1981;15(1-2):21-5.
[details]
[close]
- Kosovel Z, Baucić I, Lazić B. [The analysis of metal usage in the production of crowns and bridges]. Acta Stomatol Croat. 1980;14(1-2):1-4.
[details]
[close]
| Title in English: |
The analysis of metal usage in the production of crowns and bridges |
| Title in Croatian: |
Analiza utroska metala u izradi raznih krunica i mostova. |
| Type of Article: |
not determined |
| MeSH: |
CROWNS DENTURE, PARTIAL GOLD ALLOYS |
| Abstract: |
(not available) |
- Nikšić D, Vuletić S, Kraljević K, Knezević I. [Evaluation of defects in the dentition by quadrants and electromyographic data]. Acta Stomatol Croat. 1974;8(1):17-22.
[details]
[close]
- Suvin M, Predanić-Gasparac H. [Elastic occlual support]. Acta Stomatol Croat. 1967;2(1):35-40.
[details]
[close]
|